< < back to product page
Washware Essentials Ltd
Kestrel Court, Harbour Road, Portishead, Bristol BS20 7AN
Phone: 01275 400456
Web: www.washwareessentials.co.uk
E-mail: enquiries@washwareessentials.co.uk

Heavy Duty Bottle Filling Trough

Heavy Duty Bottle Filling Trough Multiple drinking water bottle filling station

Heavy Duty Water Bottle Filling Station

Product Code HDMBFS
  • Heavy duty drinking water bottle filling trough.
  • Trough manufactured in one piece from 1.6mm thick stainless steel for extra vandal resistance and durability.
  • Available in four standard lengths - 1200mm with two bottle fillers - 1500mm with three bottle fillers - 1800mm with four bottle fillers - 2400mm with five bottle fillers.
  • WRAS approved heavy duty swan neck bottle filling taps.
  • Press button time flow operation to prevent wasting water.
  • The trough is complete with integral wall brackets and 38mm centre waste fitting.
  • Optional front support legs are available.
  • Optional 850mm high stainless steel freestanding support frame with shelf.

Bottle Filling Station Size

  • 1200mm, 1500mm, 1800mm or 2400mm long.
  • 400mm front to back.
  • 150mm deep with 75mm splashback.


  • From stock usually 1 to 2 working days.

Optional Extras

  • Extra bottle fillers per station upon request at additional cost per bottle filler.
  • 38mm plastic bottle trap.
  • Stainless steel front support legs.
  • Stainless steel support frame with shelf - 850mm high.

Click here to see our full range of drinking fountains.

**All pictures shown are for illustration purpose only and may be subject to change without notice. Actual product may vary due to product enhancement.
All dimensions shown are for guidance only and may be subject to change or alteration without notice. All items manufactured or purchased separately from a third party to fit our products should be checked against the actual dimensions of the physical product before purchase. We will not be liable for third party costs and consequential loss associated with the items not fitting third party components.**