< < back to product page
Washware Essentials Ltd
Kestrel Court, Harbour Road, Portishead, Bristol BS20 7AN
Phone: 01275 400456
Web: www.washwareessentials.co.uk
E-mail: enquiries@washwareessentials.co.uk

Biobot Childrens Hand Dryer

Biobot Childrens Hand Dryer

Biobot Childrens Hand Dryer

 

Product Code B-BIOBOT

The Biobot childrens hand dryer encourages children to wash and dry their hands on a regular basis. Good hand hygiene will limit the spread of germs and keep school attendances high. High speed hand dryers can be a bit scary for younger users, the Biobot introduces children to hand dryer use with a friendly face with a lower decibel rating.

  • Wall mounted hand dryer.
  • Choice of two backboards with environmental message.
  • No-touch infra red sensor operated.
  • Low energy consumption. Uses just 10% of the energy consumed by normal hand dryers.
  • 98.5% saving over paper towels.
  • Typical drying time 10 seconds.
  • CE and WEEE approval.
  • 900 watts rating.
  • 5 year warranty for England and Wales (3 years on site parts and labour, years 4 & 5 parts only).
Size
  • 280mm wide.
  • 175mm front to back.
  • 300mm high.

Technical Specification

  • Operating voltage: 220-240Vac, 50 Hz.
  • Air speed: 64 m/s (140m³/h).
  • Motor type: 650W adjustable brush type.
  • Heater element: 250W thermal protected.
  • Rating power: 900W.
  • Drying time: Under 10 seconds.
  • Circuit operation: Infrared automatic, self adjusting.
  • Timing protection: 60 seconds auto shut off.
  • Drip proof: IP22.
  • Isolation: Class I.
  • Net weight: 4.5kg.
  • Finish: Die cast aluminium white/silver/chrome.
  • Decibel rating: 76dba @ 1 meter.
Delivery
  • From stock usually 3 to 5 working days.

Click here to view our full range of washroom accessories.

**All pictures shown are for illustration purpose only and may be subject to change without notice. Actual product may vary due to product enhancement.
All dimensions shown are for guidance only and may be subject to change or alteration without notice. All items manufactured or purchased separately from a third party to fit our products should be checked against the actual dimensions of the physical product before purchase. We will not be liable for third party costs and consequential loss associated with the items not fitting third party components.**